Reglazing your bathtub with us using the ECO-LiquidLiner technology ,would drastically change the surface look and feel. Below all you need to know on how to keep it looking this way.
WHAT TO DO THE NEXT DAY
You must avoid touching the bathtub for 48hrs (at 21 degrees) after the refinishing process starts.
Toilet, sink or Vanity which is within 4 ft from the refinished bathtub should not be used for 48hrs (at 21 degrees) after the refinishing process starts.
The Bathtub can be fully used after 48hrs.
The BEST WAY to keep your bathtub in its best for very long time is to wipe it dry with a soft absorbing towel after every use. It helps to prevent soap scum from building up, which is important since it is extremely hard to remove once it hardens.
Once a week , spray the tub with one of our recommended cleaning products and wait for 2-3 minutes. Then, agitate with a towel or a sponge and finally rinse with hot tap water.
Do not use abrasive pads and abrasive cleaning products!! the refinished surface is non-porous and will get scratched permanently.
In the case of using a new cleaning product, make sure to review its instructions and compatibility with acrylic bathtubs. In every case you must test it first on a small area to ensure compatibility.
Recommended Cleaning products
We recommend using the following products:
• Lysol® Power Bathroom Cleaner
• CLR® Bath & Kitchen® Cleaner
• Fantastik All purpose cleaner
Are you a dog owner? we love dogs!
If you usually wash your dog in a tub, put a bathmat or a towel on the bottom of the tub and over the ledge to avoid scratches left by dogs’ nails when they climb in or out of the tub. If your dog still manages to accidentally scratch the surface, Call us to schedule polishing service.
Storing your shampoos, shower gels, soap, etc. is best using a shower caddy or a shelf to prevent an accidental chipping.
Try not to leave products, especially Alkaline ones, on the surface, since they will attack it over time. Use a raised holder if you have a built in soap dish.
Try not to use tools or heavy objects near the refinished surface, use protective padding in case they accidentally drop.
Refinishing your bathroom fixtures’ surface is a cost effective option for replacement. As brand new fixtures, proper maintenance is required in order to extend its life. The guidelines in this page would be useful for a new fixtures as well.