SPRAY-ON BATHTUB REGLAZING
Here in SURFACE INTEGRITY we recommend to use the SPRAY-ON reglazing application Only when the ECO-CASTING is not possible to install.
The Only cases were Spray Paint would be the only solution are:
- Acrylic/Fiberglass bathtubs/showers with complex structure or complete Tub & wall acrylic encloser with no separation between the two.
- Acrylic / Fiberglass bathtubs with Jets (whirlpool)
Our Six-layer resurfacing system will result a tub with a beautiful gloss, which can be used the next day.
The Spray On application Involves with Spraying on the bathtub multiple coats of Industrial grade coating
Our technician starts by removing the old caulking , then de-greasing and etching the bathtub. Our prep process ensures eliminating all contaminants from the surface to enable excellent adhesion. We then mask the areas around and starts applying one heavy coat of our unique hi-tech bonding agent + 2 coats of Epoxy Primer + 4 coats of High Performance bathtub coating in High gloss finish. The coatings applied using fine finish spray system that enables factory fine smooth finish. The final thickness of coating is between 4-5 mils DFT.
By the time our equipment is back to the track the bathtub is ready for the final touch of removing the masking and installing fresh new caulking.The bathtub will be ready for use within 24hrs.
With proper care a bathtub refinished using this system can last between 5-8 years depends on the amount of usage it gets.
In order to extend the tubs life user must avoid using rubber mats.Avoid using abrasive or bleach containing cleaning products.
Avoid placing shampoo bottles on the tub ledge. Any case of leaking faucet must be fixed promptly. Any standing water must be wiped off at the end of taking a shower.In case of accidental damage , chips must be addressed and repaired to maintain the tub surface integrity.